Reolink Duo Floodlight Mount Installation

Please read the Reolink Duo Floodlight installation instructions first. These guidelines apply to the following Reolink models:

Junction Box Wall Mounting

All our mounts assume you are installing the floodlight over an existing junction box on the wall or soffit. For new installations with exposed (surface mounted) junction boxes, we have covers available for a clean installation. Covers are not needed for recessed (flush mounted) junction boxes.

Reolink Duo Floodlight Wiring

For Reolink Duo Floodlight WiFi, our REFJ-W wall mount has a slot for a user-supplied Meanwell IRM-30-12ST power module available from DigikeyMouser, and NewarkREFJ-P is available for the Reolink Duo Floodlight PoE.

Complete the wiring as shown and install the mount over the junction box.

Reolink Duo Floodlight Bracket Install Install the metal mounting bracket (provided by Reolink) to the mount using the #8x1/2" thread forming screws provided in our kit. Do not substitute the screws.
Reolink Duo Floodlight Installed on Wall

Hang the Reolink Duo Floodlight on the bracket and complete the installation using the provided #8x1-1/4" thread forming screws.

As needed, seal the top half of the junction box and mount with caulk or weather resistant tape to protect against water intrusion.