Some of the best places to put a camera are corners, where no flat wall exists to mount against. These mounts fasten directly to a square 90° building corner and present a 4-inch junction-box-style fixture interface at the corner itself.
Which one you need
-
Outside corner — for an external building corner, where two walls meet pointing outward. Available as a universal version for fixtures using a factory crossbar, and as a version shaped for the eufy Floodlight Camera E30, E340, and S330.
-
Inside corner — for an internal corner, such as where a wall meets a perpendicular wing or an alcove.
Specifications and fit
Both universal mounts present a 127 mm (5 in) round fixture face at 65 mm (2.6 in) depth, with four mounting bosses at 3.5-inch spacing and four at 2.75-inch spacing — a normal installation uses two opposing holes for the fixture crossbar. They accept fixtures, not only cameras, that use a factory crossbar and a nominal 4-inch junction-box interface. Two threaded 1/2-inch NPT conduit openings are provided, with closure plugs included.
Before you order
Conduit fittings, wall screws, and anchors are not included. No gasket is included; a fixture with a properly fitted gasket and correctly installed fittings provides reasonable weather protection. Each mount has a drain opening that allows incidental moisture to weep out — none is a watertight enclosure. No load rating is provided.
