This item is 3D-printed in durable PETG via FDM. Do not install in locations where surface temperatures may exceed 55°C (131°F). Because this product is 3D-printed, it may show subtle layer lines or small surface imperfections. These cosmetic variations are normal and do not affect function or performance.
It is not ETL or UL-listed and should not be used in applications where certified components are required by code. For those situations, we recommend using common off-the-shelf (COTS) parts. Our responsibility is limited exclusively to the replacement of any defective product. We are not liable for incidental, consequential, or indirect damages arising from use or misuse of this item.
Slim 90° Single Soffit Mount for Floodlight Cameras
Regular price
$31.95
Regular price
-11%
$35.95
Sale price
$31.95
Couldn't load pickup availability
Steel Where It Counts, Low-Profile Where It Shows
Most floodlight cameras are designed for a flat, vertical wall. The Slim 90° Single Soffit Mount turns a soffit junction box into a proper outward-facing mount, with a full-length steel core doing the structural work and gaskets sealing both ends.
A zinc-plated steel threaded pipe anchors to your junction box and runs the entire length of the mount, supporting it from end to end. Actual coverage depends on the camera's field of view and final aim.
🌟 Why Choose This Mount?
- Full-Length Steel Core: A zinc-plated steel threaded pipe, locked to a steel crossbar at the junction box, supports the entire mount along its full length for maximum rigidity and minimal camera shake in wind.
- Sealed at Both Ends: Your camera's factory mounting plate and gasket seal around the mount's opening, exactly as the manufacturer intended. A weatherproof gasket is included to seal the mount to your junction box.
- Low-Profile Styling: The slim, one-piece curved shell tucks neatly under the soffit for a clean, finished look instead of a bulky add-on bracket.
- Built for Outdoor Exposure: 3 mm walls printed in PETG, with the camera base kept close to the roofline so more of your device stays sheltered under the eave.
- Standard Junction Box Interface: Fits a standard 4-inch round junction box with 88.9 mm (3.5 in) mounting-screw spacing.
📹 Camera Compatibility
Compatible with floodlight cameras designed to install on a standard 4-inch junction box with 88.9 mm (3.5 in) mounting-screw spacing, including:
- Ring Floodlight Cam (Pro/Plus/1)
- Ring Outdoor Cam Pro / Spotlight Cam Pro (only with Hardwired Kit)
- Ring Spotlight Cam Plus / Spotlight Cam Pro (only with Hardwired Kit)
- Arlo Wired Floodlight Camera
- Blink Wired Floodlight
- Blink Outdoor 4 Floodlight Camera
- Lorex 2K Floodlight Camera
- Reolink Elite Floodlight
- Tapo 2K+ Outdoor Wired Floodlight
- Wyze Floodlight Camera (v2/Pro)
📐 Specifications
- Structural core: Full-length zinc-plated steel threaded pipe with steel crossbar
- Shell material: PETG, 3 mm wall thickness
- Base diameter: 127 mm (5 in)
- Round device opening diameter: 127 mm (5 in)
- Overall height / drop: 177.8 mm (7 in)
- Overall width: 127 mm (5 in)
📦 In The Box
- 1x crossbar installation hardware (steel crossbar, zinc-plated nuts, star washer)
- 1x round weatherproof gasket
- 2x #8 x 19.05 mm (0.75 in) thread-forming screws
- 1x terminal block
- Extension wires
🛠️ Fix Common Mounting Issues
Need to tweak your setup further? Expand your system with our matching accessories:
- Sloped or Angled Eaves? If your soffit isn't perfectly flat, pair this with our soffit wedge to eliminate the slope and level your horizon line.
- Exposed Junction Box? Grab one of our custom matching junction box covers for a completely flush, seamless look.
- Blocked by Gutters or Downspouts? Use our soffit drop extensions to drop the camera lower and clear your home's sightline limitations.
K
Black
Wasn’t sure if I would be able to use it the way I I needed too but it worked perfectly!
J
Thank you, thank you thank you. I tried all kinds of “gerry rigging” to mount my new Ring Spotlight cam 4K camera under the eaves of my house, replacing an existing floodlight. Finally has stumbled across this website and ordered the 90° slim mount and It fits perfectly!
A
White
My old floodlight was installed under an eave, however I wanted to install a ring floodlight camera with a vertical orientation. This product works great and was the best-looking solution I could find!
N
White
Solidly made, nice design, not as bulky as other products.
E
Great product! Worked perfectly. The seller was extremely helpful.
A
White
I needed an extension for my Ring Floodlight Camera Pro that was installed with a valance obstructing my view. Alexactly had the product that I needed. I highly suggest that you called the seller (who is truly a great guy!). He talked to my contractor as well as myself to ensure that we were getting the right drop length. I was also on a very tight timeframe because I only had my contractor for 4 more business days. Alex packaged my item up until we got the payment from Etsy to go through (it never did; caused a bit of a temporary issue). I ordered directly from his website and it was mailed via overnight delivery. It was not cheap to ship but time was of the essence and Alex didn’t waste any time getting it to the shipping company that day. It is the perfect item for what I needed. I can now see my entire backyard vs 1/3 of it. The Ring cameras are not cheap, so you should get as much visibility as you possibly can. Alex really helped me with that. I am very happy that we found his products and recommend them without hesitation. What a delightful person to work with! You will not be disappointed. He even did a little modification to it for my contractor prior to shipping for his ease of installation. I’m absolutely thrilled with the final result. I’ll refer everyone to you who has a need for your ingenious products. Thank you for everything, Alex!
I'm so happy everything worked out well.
E
Great item to allow us to mount ring camera hanging down from the eaves of the roof and matched up perfectly with my camera.
K
Black
Looks awesome. Can’t wait to use it.
E
Worked great, great communication, fast shipping
E
Could have been great. Sadly, the design is shortsighted. The steel tube that runs down the back of the light/camera mount was needlessly too short. The plastic housing itself seems to be high quality. I will still need another such device for the backyard. Unfortunately, I will not be able to be able to faithfully choose this device again.
E
A ++++++++ great transaction would recommend this seller
E
Wonderfully crafted and worked perfectly for my Blink Floodlight cameras. So good I bought a second!!! Shipped fast!