This item is 3D-printed in durable PCTG via FDM. Do not install in locations where surface temperatures may exceed 55°C (131°F). Because this product is 3D-printed, it may show subtle layer lines or small surface imperfections. These cosmetic variations are normal and do not affect function or performance.
It is not ETL or UL-listed and should not be used in applications where certified components are required by code. For those situations, we recommend using common off-the-shelf (COTS) parts. Our responsibility is limited exclusively to the replacement of any defective product. We are not liable for incidental, consequential, or indirect damages arising from use or misuse of this item.
Ring Cam Siding Clip - Dutch Lap, Traditional, or Plank Siding
Couldn't load pickup availability
Mount Your Ring Camera Without Drilling Into Your Siding
Install a compatible Ring battery camera on Dutch lap vinyl, traditional vinyl, or plank siding without drilling mounting holes through the siding. Choose the clip that matches your siding profile, assemble the camera mount, and slide the clip beneath the siding edge.
🌟 Why Choose This Mount?
- Drill-Free Installation: Mounts beneath the siding edge without drilling camera-mounting holes through the siding.
- Profile-Specific Grip: Dutch Lap, Traditional, and Plank clips are each shaped for their intended siding cross-section.
- Common Ring Mounting Plate: Every variant includes the same round plate with both current four-hole and legacy two-hole Ring mounting patterns.
- Clean, Low-Profile Position: Keeps the camera close to the siding for a compact finished installation.
📹 Camera Compatibility
The included round mounting plate supports:
- Currently sold Ring battery cameras that use the current four-hole backing plate
- Older Ring Stick Up Cam models that use the smaller two-hole backing plate
Compatible camera families include Ring Outdoor Cam (formerly Stick Up Cam) and Ring Spotlight Cam battery models that use either supported mounting pattern.
🏠 Choose Your Siding Profile
- Dutch Lap: For vinyl siding with a curved notch that creates a stepped or shadowed profile.
- Traditional: For flat, overlapping vinyl siding without the curved Dutch lap notch.
- Plank: Tested on HardiePlank fiber-cement lap siding. On wood lap siding, the clip may not hold securely if boards are warped or don't have a clearly defined inner edge. This clip is longer than the vinyl versions.
Review the siding cross-section images before ordering. Similar-looking siding can require different clips, and the three profile-specific versions are not interchangeable.
📐 Specifications
- Mounting plate diameter: 68 mm (2.7 in)
- Ring mounting patterns: Two-hole and four-hole
- Available colors: White and black
- Clip geometry: Length and depth vary by siding profile
📦 In The Box
- 1x profile-specific 3D-printed siding clip
- 1x round Ring camera mounting plate with two-hole and four-hole compatibility
- 1x M3 × 10 mm round-head thread-forming screw
- 4x M3 × 10 mm flat-head thread-forming screws
🛠️ Installation
- Slide the siding clip onto the included round mounting plate and secure it with the supplied screws.
- Attach the Ring camera backing plate using the matching two-hole or four-hole pattern.
- Insert the assembled clip beneath the appropriate siding edge, then gently pull down to seat it.
- Attach and adjust the camera according to Ring's instructions.
For additional camera details, see our Ring Camera Mount Compatibility Guide.