Home » Angled Soffit Wedge for eufy E340 and S330 (8°–45°)
Angled soffit wedge mount for a Eufy floodlight camera in white, included black weatherproof gasket, metal crossbar hardware, and screws.
Measuring Soffit Wedge Angle
A 3D-printed angled soffit wedge mount for a Eufy floodlight camera in white.
Angled soffit wedge mount for a Eufy floodlight camera in white, included black weatherproof gasket, metal crossbar hardware, and screws.
Measuring Soffit Wedge Angle
A 3D-printed angled soffit wedge mount for a Eufy floodlight camera in white.

Angled Soffit Wedge for eufy E340 and S330 (8°–45°)

In stock
SKU: EUW
(1)
$34.95

Level an eufy E340 or S330 Floodlight Camera on an Angled Soffit

This custom-angle wedge creates a level mounting surface for an eufy E340 or S330 Floodlight Camera installed beneath a sloped soffit. It has a standard 5-inch soffit-facing base and a camera-facing flange shaped for the eufy rounded-square mounting base.

🌟 Why Choose This eufy Wedge?

  • Confirmed for eufy E340 and S330 Floodlight Cameras
  • Custom angles from 8° to 45° in whole-degree increments
  • Includes the gasket, crossbar hardware, and thread-forming screws
  • Purpose-shaped for the eufy rounded-square mounting base

📹 Camera Compatibility

  • Confirmed: eufy E340 Floodlight Camera
  • Confirmed: eufy S330 Floodlight Camera
  • Potential fit: another eufy floodlight camera using the same rounded-square mounting base; contact us before ordering because other models have not been confirmed

📐 Specifications

  • Angle range: 8°–45°, whole degrees only
  • Soffit-facing base: 127 mm (5 in) diameter
  • Camera-facing interface: eufy rounded-square mounting base
  • Height: varies with the ordered angle

📦 In The Box

  • One custom-angle eufy soffit wedge
  • One gasket
  • One crossbar hardware set
  • Two thread-forming screws

🛠️ Ordering and Installation

  1. Measure the soffit slope with an angle finder.
  2. Enter a whole-number angle from 8 to 45 in the required Angle field.
  3. Install the gasket between the soffit and wedge.
  4. Install the crossbar and camera using the supplied hardware and the camera manufacturer's instructions.

⚠️ Before You Order

  • A missing angle or fractional angle will delay the order.
  • Do not assume compatibility from the eufy brand name alone; compare the mounting base or contact us.
  • This item is made to order in your selected configuration. Please allow additional production time before shipment. Because production is specific to your selection, returns are not accepted.
  • Cancellations cannot be accepted once production has begun.

This item is 3D-printed in durable PETG via FDM. Do not install in locations where surface temperatures may exceed 55°C (131°F). Because this product is 3D-printed, it may show subtle layer lines or small surface imperfections. These cosmetic variations are normal and do not affect function or performance.

It is not ETL or UL-listed and should not be used in applications where certified components are required by code. For those situations, we recommend using common off-the-shelf (COTS) parts. Our responsibility is limited exclusively to the replacement of any defective product. We are not liable for incidental, consequential, or indirect damages arising from use or misuse of this item.