eufy SoloCam Siding Clip - Dutch Lap, Traditional, or Plank Siding

Mount Compatible eufy Cameras on Siding Without Drilling the Siding

This reinforced mount combines two stacked, matching siding clips in your selected profile with a square mounting adapter plate. The plate includes multiple hole patterns for the compatible eufy mounting hardware listed below.

🌟 Why Choose This Mount?

• No holes in the siding: The clips install at the siding joint instead of fastening through the siding.
• Reinforced two-clip construction: Two stacked clips provide additional support for the camera and mounting plate.
• Device-specific plate: Multiple hole patterns accommodate the confirmed eufy models listed below.
• Three siding profiles: Select Dutch Lap vinyl, Traditional vinyl, or Plank based on the cross-section images.
• Positionable: Insert the clips where the siding flexes more easily, then slide the assembly toward a stud for improved support.

📹 Camera Compatibility

Compatible with the original mounting hardware for:

• eufy Indoor Cam 2K
• eufy SoloCam E30
• eufy SoloCam S340
• eufy 4G LTE Cam S330

Camera and original eufy mounting hardware are not included. If the camera's solar panel will be installed separately, it requires its own compatible siding mount.

🏠 Choose Your Siding Profile

• Dutch Lap Vinyl: For the Dutch Lap profile shown in the listing images.
• Traditional Vinyl: For the Traditional profile shown in the listing images.
• Plank: For the plank or fiber-cement profile shown in the listing images. These clips are longer than the vinyl versions.

Compare your siding's cross-section with the listing images before ordering. The three clip profiles are shaped differently and are not interchangeable.

📐 Specifications

• Construction: two stacked, matching siding clips in the selected profile and one square mounting adapter plate
• Approximate maximum dimensions: 3 × 3 × 1.5 in
• Approximate weight: 3 oz

📦 In The Box

• 2 × PCTG siding clips in the selected profile
• 1 × square mounting adapter plate
• 1 × M3×10 round-head thread-forming screw
• 3 × M3×10 flat-head thread-forming screws

🛠️ Installation

1. Stack the two siding clips and slide the square mounting adapter plate onto the clips. Secure the assembly with the included round-head screw.
2. Attach the compatible eufy mounting hardware to the adapter plate with the included flat-head screws.
3. Insert the clips between siding panels, or beneath the edge of plank siding, where the siding can flex more easily. Pull downward to seat the clips.
4. Slide the assembly sideways toward a stud for improved siding support and stability.
5. Install and aim the camera using the manufacturer's instructions.