This item is 3D-printed. It may show subtle layer lines or small surface imperfections. These cosmetic variations are normal and do not affect function or performance. Our responsibility is limited exclusively to the replacement of any defective product. We are not liable for incidental, consequential, or indirect damages arising from use or misuse of this item.
Upgrade your FTC robot with a clean, competition-ready reversible robot sign. This one-piece plate features Blue on one side and Red on the other, dropping into a black PETG mounting frame that locks it securely in place—no clips, screws, or awkward jury-rigging required.
Printed in PETG for toughness and heat resistance, the sign stays rigid, vibrant, and reliable through every match.
Limited Availability: Because our fabrication equipment is in high demand, choose the STEP file option if you can print this yourself. These files are compatible with Bambu X/P/H/A1-series printers (with AMS) and the Prusa XL 5-toolhead system.
To keep things organized on both our ends, only the Lead Mentor should submit the order. Active FTC Teams only.
DIMENSIONS
- 175mm x 70mm for the number plate
- 202mm x 73mm with frame
FEATURES
- Reversible Blue/Red one-piece sign
- Black PETG locking frame keeps the plate firmly in position
- Smooth flip-and-go color switching
- Lightweight, durable, and built for competition
- Secure with M4 screws, 192 x 32 mm apart.
PRINTING INSTRUCTIONS
For best results, use a 0.4mm nozzle. Import the Backing and Numbers step file together as a single object with multiple parts. This will ensure they are stacked correctly. Lay the Frame face down. Use any profile with a 0.2mm layer height; no supports needed. Turning on ironing can improve the surface finish of the top layer, but it will significantly increase print time. Printing the backplate is optional.
INSTALLATION INSTRUCTIONS
- Push the clips inward gently until they break loose from the frame (see photo).
- Secure the backplate with a small amount of glue. Do not apply glue near the clips.
- Install the frame to your robot using 2 or 4 M4 screws. Do not overtighten.
- Slide the robot sign into the frame and you are done!